Collection: Sticker installation guide

The best weather for applying your stickers is when the temperature is mild and moderate. Avoid application if weather is very hot or wet as this can affect the adhesive and won't last as long as you'd like.

Step 1-

Find a suitable location on your vehicle, assess the area you want your sticker to be placed and determine if it will fit or not.

Step 2-

Once you have the area you want your sticker use a microfiber cloth and a car window cleaning spray and clean down your surface, make sure to get every bit of dirt and dust up as it will effect the outcome.

Step 3-

After the area is cleaned and dried get a squeegee or a card and make sure the sticker is stuck to the clear transfer tape, after that remove the white backing paper making sure nothing is left on it.

Step 4-

Once you have removed the backing paper line up your sticker by hovering it above the area you want it before putting it straight down (we don't want a wonky sticker). Once you have it straight and all level you can now apply one edge down onto the car (do not stick the whole thing down in one as it will create air bubbles) grab your squeegee or card again and slowly lay your sticker down onto the surface. Once its been laid down it will not come back up.

Step 5-

After you have applied your sticker with the transfer backing still on squeegee it all down making sure all small air bubbles are out. When you are certain its all done grab one corner on the transfer tape and slowly take it off diagonally, any sticker that comes off with the tape just lay it back down, squeegee it a bit more and try again. 

Step 6-

After you have removed the transfer tape make sure there are no bubbles and it is all straight.

You have now applied your common cars club sticker successfully, proud of you :). Don't forget to show it off on your story and tag us @thecommoncarsclub we can't wait to see it!!